The LEPRO E1 AI Permanent outdoor lights outdoors are an inexpensive external lighting alternative with which users should offer a premium lighting experience. With user-friendly controls, simple installation and furnishings as well as a variety of adjustments and functions, the permanent E1-AI lights may be the external lighting you are looking for. Despite its long list of functions and setups, the LEPR is permanently outdoor Lighting solution enough to keep a candle for the competition? Take this coffee and let us find out outdoors in our Repro E1 AI AI review.
Specifications
- Current price:
- 50 foot: $ 152.99 (Amazon – Immediately $ 40 discount voucher available – $ 112.99)
- 100 feet: $ 254.99 (Amazon – Immediately $ 70 discount coupon available – $ 189.99)
- 150 foot: $ 379.99 (Amazon – Immediately $ 100 discount coupon available – 279.99 USD)
- Tax type: smartphone app, voice control, inline -Switch (Basic on/Off Control)
- Connection: 2.4 GHz wireless
- LEDs: Two built -in WS2811 IC (one for RGB, one for white)
- Weather evaluation: IP67
- Length: 50 ', 100', 150 '(100' tested for review)
- LED COUNT: 60
- Light distance: 20 ”
- Brightness: 40 lm for white/20lm RGB
- Dimmable: yes
- Adaptable light pattern: yes
- Music synchronization: yes
E1 AI Permanent outdoor light – design and highlights
The LEPRO E1 AI Permanent Outdoor Light is a solution for the outer cord, which gives its outdoor area accent and color. With a compact design, this string light system is constructed for easy installation and furnishings. Each light chain measures about 25 'and contains 15 LEDs for simple layout planning. With three models from which 50 ', 100 and 150' is available, the LEPRO E1 AI permanent outdoor lamps offers a serious amount of adjustments.
Each LED is contained in a hard plastic upper shells rated for IP65, which makes it ideal for both warm and cold climate zones. The LED consists of RGB+ two IC chips to control both the color and the white light as much as possible. The lights are approximately 1.67 'apart, which was an excellent lighting cover in the tests.
The lights and strings are well constructed and feel durable. The LED plastic covers are also exceptionally robust and seem to withstand the series of weather that we get here in Canada. In the few weeks in which they were installed, the E1 AI weathered outdoor light nights with frost, heavy rainstorms and an unusual warm day after May, and before they ask, yes, the weather here is drunk. However, it is that lepros have had no problems with the weather so far.
The E1 60 model, which was received for checking, contains four light strands, the 100 -inch cover with the ability to support a further strand. This also applies to the E1 30 (50 '). However, the E1 90 maximizes 6 strands (150 ') on the pre -packed. Opening the E1 60 box reveals the four light strands, two extension cables, a 10 ', the second 5', a performance adapter and an inline one/off controller, in which the Wi-Fi, Bluetooth and controls of the system are also housed.
Setting up the lighting kit is a simple matter with two options to choose from. Each LED has a pre-installed 3M adhesive strip on the back, which can be applied to a clean surface. Alternatively, assemblies are also integrated into the plastic shape with which each LED can be screwed into a sofit or wall. The box also contains additional adhesive strips as well as enough wall anchors and screws to assemble all LEDs. LEPR has recorded everything that is necessary for the system's establishment. No additional hardware required.
For my installation, I decided on the adhesive strip because we just installed a new launch last year. My wife was not particularly interested in the fact that I drill holes in it, even in the name of science. The installation is simple and begins at the opposite end, into which you connect the controller, simply peel and stick each LED and hold twenty to thirty seconds. The only real thing that must be taken into account is that the surface is flat and clean. In my case, I fed the connection wire from every light into the J-Trim to eliminate the wiring. The result was a clean and barely noticeable installation. When connecting strands, LEPR chose a waterproof, thread plug connector that makes sense in this setting. A small seal in the plug helps the thread connection and withstands the weather.
After I had carried out all 100 lights, I was able to use both extension cables that I ran along the downput and connected the LEDs into the controller. As soon as the LEPRE app is inserted and supplied with electricity, it recognizes the new light immediately. After a few simple setup steps, the permanent E1 AI outside light can be added to your existing household, and they are essentially in operation. The whole process too
As soon as it is put into operation, there is a wide range of lighting options and functions that can access the LEPRO app for the permanent external light of the E1 AI. The RGB+IC chips contained in each LED light offer you an impressive amount of control over brightness, color, temperature (2200k-5600K white) and even the pattern of the lights. With the brightness, the LEDs in white light mode can produce 40 lumens per light and 20 lumens per LED if RGB is activated.
While I was a bit overwhelmed when I was reading the specifications, it turned out that they were perfectly coordinated to emphasize a room. Especially in the inclusion of the white light mode, the permanent E1 AI outside light ensures the perfect lighting and emphasizes the room without overwhelming. Although the RGB mode is slightly dimmer, it still offers a great accent for a back yard and offers character and color for your outdoor area.
The app gives the system an impressive amount of control, although it can take a little time to understand some of the system's advantages and disadvantages. For example, when managing the four strands, you have to define a pattern for one that applies to all four. While it looks as if the app has the ability to recognize the light length, I tried to process this function correctly. This was not a big problem in my setup, but it should be addressed in further app updates.
As already mentioned, every LED can be addressed, so that entertaining thematic color schemes are made possible using the RGB mode. The color selection is managed by selecting a base color and then adjusting the sliders to the color you are looking for. It works well and offers users a lot of creative freedom.
As with the LEPRESTALLACH (Insert the link from a different rating as soon as it is live)The E1 AI permanently Outdoor Light also has a AI generation mode. Essentially, you can describe a scene or a feeling that is used as a request for the AI to create a sample and color scheme. Due to the restrictions of the physical lights, it is a bit simple, but it works well. Finally, LEPR has integrated a music synchronization mode in which patterns are presented to enable a simple connection between the music of your phone and the string lights. It is an entertaining addition to every party and worked quite well when testing.
Last thoughts
The LEPRE E1 AI permanent outdoor light outdoor light is a solid lighting system that is an inexpensive alternative to some other brands on the market. It offers a solid lighting experience that is only slightly hindered by some small errors in the app. Otherwise, the E1 AI permanently works outdoor light and is a great option for a budget -friendly outdoor lighting solution.
The product described in this article was provided by the manufacturer for evaluation purposes. Some articles can contain affiliate links, and purchases that are done by this activity lead to a small commission for the website. Commissions are not addressed to the author or associated with compensation in any way.